Open Roads Radio forum for Ham, Amateur Radio and RV camping


Reply
 
Thread Tools Display Modes
 
Old 05-20-2017, 07:54 PM   #1
kj4oll
Junior Member
 
Join Date: May 2017
Location: Florida
Posts: 2
Default Hi from KJ4OLL in Florida!

Recently retired, buying an RV next week. (First time owning one).
XYL is younger, still working for a few more years.
So there is time to set up the RV.
I have a Yaesu 857D that is still in the box, thinking about installing it in the RV. Antenna is a puzzle.
Wondering if most folks stick to UHF/VHF in RV use, or is there any reason to include an HF antenna?
73
Frank
KJ4OLL
PS: Not planning to put any of the boatanchors in the RV, but it would help traction on ice......
kj4oll is offline   Reply With Quote
Old 05-20-2017, 09:47 PM   #2
coupevillefish
Member
 
Join Date: Mar 2015
Location: Coupeville WA
Posts: 57
Default

I recently set up my very small camp trailer (think VERY little ground plain) with an ATAS 120a behind my FT897. I used a duplexor to split 2/.7 meters. I'm still testing but I have successfully tuned 20 and 40 meters and 2 meters. My first contact on 20 meters was Coos Bay, OR from North of Seattle, well over 300 miles.

I have not been able to get it to tune 10 meters, which I would like to do. Going to keep trying. I'm going to also try 6 meters.
coupevillefish is offline   Reply With Quote
Old 05-21-2017, 11:23 AM   #3
wa8yxm
Senior Member
 
Join Date: Nov 2007
Location: Mobile, on the road
Posts: 1,135
Send a message via AIM to wa8yxm Send a message via Yahoo to wa8yxm Send a message via Skype™ to wa8yxm
Default

I stick to V/U=HF when in motion for the most part When parked I work 80/40 and other bands... Currently I run a long wire with an auto-turner (Kenwood KAT-1 Marine grade auto-turner) It can feet a "Goat rail" made of 1/2 inch copper pipe. that runs along the roof, 10ga wire connectes it to the tuner (WHy 10ga.. Well. think "What's in the junk box" 14 would work nicely)

Or I have a 50' and 80' 14 ga wires. the 50 (if parked for long enough) goes up a 20 foot fish pole on the back of the bus to a flag pole at the front.

The longer wire to tree limbs

And next week if it is delivered when anticipated an ALPHA portable will be added for all band use.. (I can do rapid switching between long wire and Alpha)

Oh, I( don't know how serious, and this is not for RV use.. at least I don't think it is without more research but talking to Alpha folks last Friday (Dayton-Hamvention) they told me of a new product they are coming out with for HOA afflicted folks.

They will call it the HF antenna (H=Harbor F=Freight) You buy part from Alpha and a flag pole from HF, Fly the flag on Flag day, July 4 and so on.. Your HOA sees the flag pole... If they object to your flying the flag.. Call in the Marines (I am being serious here) to tell 'em why one should be allowed to fly the flag...
wa8yxm is offline   Reply With Quote
Old 06-29-2017, 02:57 AM   #4
FrederickW
Junior Member
 
Join Date: Jun 2017
Posts: 1
Default

Did you get it all setup kj4oll?
FrederickW is offline   Reply With Quote
Old 06-29-2017, 04:54 PM   #5
Radio
Administrator
 
Radio's Avatar
 
Join Date: Nov 2007
Location: Fayetteville, GA, USA
Posts: 2,921
Default

to FrederickW.

Make yourself at home.
__________________

KU4OJ "Wade" Ships Captain, CFO, Chief Engineer
KG4DQQ "Kathy" 1st Officer, Navigator, Best Friend
2007 F-150 SuperCab - 2009 Rockwood 8280SS
Lot's of mostly Kenwood stuff

Radio is offline   Reply With Quote
Old 06-30-2017, 08:34 AM   #6
kj4oll
Junior Member
 
Join Date: May 2017
Location: Florida
Posts: 2
Default

Hi,
I found the box containing the Yaesu 857D, and appreciate the advice on the ATAS 120A. (Need one).
Discovered all the parts to remote the faceplate too.
But have no idea yet where I can mount the transceiver and faceplate in a 2017 winnebago view 24G. Or if I should power it from the engine battery, which might be under the drivers seat? or the house batteries under the entrance steps.
Also not sure where to cut a hole to run the antenna cable.
I can see that with all the exterior hatches and push-outs, I will need to design/weld up some kind of custom antenna mount.
Probably going to wait until cooler weather, too hot and rainy to work outside just now.
73
Frank
KJ4OLL
kj4oll is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Powered by vBadvanced CMPS v3.2.3

All times are GMT -5. The time now is 10:41 PM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2017, vBulletin Solutions, Inc.