Quote:
Originally Posted by W9WLS
Jim:
Go to your Auto Parts store and explain the proublem, there are preasure gauges and filler tools made with two sided heads set at about a 30 degree angle for such purposes.
Might also try some of the larger truck stop's.
If I can get a pix to load I'll shoot one later today and show you what I mean.
|
Even with two sided heads, the stems can be difficult to reach.
On our rig I put straight extensions on the front to clear the stainless simulators which have smaller holes than the rims do. On the rear wheels I bought a set for the dual wheels with the flexible tubing and mounting clips. Some hold the air pressure of the tire, not recommended because if they loosen they can cause a flat tire.