View Single Post
Old 05-21-2014, 01:58 PM   #1
electricflyer
Senior Member
 
electricflyer's Avatar
 
Join Date: Jul 2013
Location: Douglasville, GA
Posts: 417
Default Television Wall Mount

Got 2 TV wall mounts from Walmart.com for the TT. For anyone interested in putting up a wall mount, they are all over the place and the trick is to find the one that works for you. Since a TT rides a lot rougher than a MH I found it necessary to be able to remove the TV during transport. I got a small mount, model EMW3301, that sells for 17.98 + tax. That model makes it easy to lift the TV on or off the mount. Actually I got two. This one will work for most 13" to 37" televisions. I have a 29" for the living area and a 17" for the bedroom.
A little advise based on my experience. The little stick on label that says "TV Wall Mount" is not placed in the center of where you would assume the backer board to be! Before you drill a hole to mount the device I suggest you find the smallest drill you can put your hands on and drill a pilot hole first. That way when you miss the backer board it won't be so hard to cover up. I found that the stick on label is near the top edge of the backer board. I called FR to find out how big the backer board is and the excellent customer service person didn't have a clue and didn't really want to find out so he could help. But, anyway, mission accomplished. Another suggestion, if you are going to remove your TV for transport get a push on coax adapter, female screw on to male push on F connector. I got mine from Radio Shack (p/n 278-218) which is by far not the cheapest but by luck they were able to put their hands on one. I leave the coax on the TV so a adapter is only needed for one end. Also nice to have the adapters for outside cable hookup.
Marv
KT4W
electricflyer is offline   Reply With Quote