Thread: LED Light's
View Single Post
Old 10-23-2013, 06:12 PM   #25
W9WLS
Senior Blame Catcher
 
W9WLS's Avatar
 
Join Date: May 2010
Location: Oakland City Ind.
Posts: 265
Send a message via Yahoo to W9WLS
Default

Quote:
Originally Posted by TimeToGetGoing View Post
John,
anyway you could share a photo or two of how you did the light conversions? I'd especially like to see what you did on the poarch light.

73
Bob
KV4MJ
Bob:
See my earlier post on these, they can be cut every third led and wire's added if needed , I used "Sure-Prep" wipes (available at medical suppliers) to prep the surface the led's I used have an adhesive backing so they were "peel & stick" .
From there it was just a matter of wiring to the switch and ground (remove the old bulb before you start) .
These are easy, just use your imagination , they are not water-proof so use some common sense , but they work well !
73, John
__________________
DE: John W9WLS
W9WLS is offline   Reply With Quote