Open Roads Radio forum for Ham, Amateur Radio and RV camping - View Single Post

wa8yxm · 07-11-2009, 10:01 AM

Re: Attaching to ladder...... If you belong to the FMCA, (If you don't give me a few minutes and I can look up the company) there is a plastics company that makes special "Ladder adapters" for the FMCA goose egg These will work just as well for a license plate type sign though you may need to drill a hole or two.... IN THE SIGN. no holes in your lovely rig

There I found it http://www.kileymold.com/ They make FMCA "plates" and holders and mounts, including one that is specifically designed to hold the FMCA goosegg to a ladder.

NOTE; the Goose egg mounts with two bolts or screws, one at each end, not with 4, like a license plate, so you will either need 2 mounting kits, an egg shaped sign, or drill two holes in the sign.

07-11-2009, 10:01 AM	#29
wa8yxm Senior Member Join Date: Nov 2007 Location: Mobile, on the road Posts: 1,139	Re: Attaching to ladder...... If you belong to the FMCA, (If you don't give me a few minutes and I can look up the company) there is a plastics company that makes special "Ladder adapters" for the FMCA goose egg These will work just as well for a license plate type sign though you may need to drill a hole or two.... IN THE SIGN. no holes in your lovely rig There I found it http://www.kileymold.com/ They make FMCA "plates" and holders and mounts, including one that is specifically designed to hold the FMCA goosegg to a ladder. NOTE; the Goose egg mounts with two bolts or screws, one at each end, not with 4, like a license plate, so you will either need 2 mounting kits, an egg shaped sign, or drill two holes in the sign.