Mine doesn't "run" anywhere...it drops straight through the bottom of the trailer. No cables are permanently installed anywhere. What I have is a weather sealed hole in the floor that's out of sight (and out of mind!) when not in use.
I can put any combination of cable into or out of the pass through, so it never becomes obsolete or inappropriate for the situation at hand.
I cut the inside floor hole first. Then I borrowed a 24" long 1/4" bit, with this I drilled a pilot hole for the hole saw from the inside, to insure the floor hole and the belly covering hole would line up. Follow me?
Keep me posted on what you wind up doing!
|