Quote:
Originally Posted by n4xyz
Hi All
We have a 30ft 5er and I want to mount a 32 foot fiberglass pole on the rear bumper that will hold up a wire. I will tune the wire with a AH-4. I was looking for suggestions for feed thru connections. I was thinking of mounting the tuner in the camper and have two feeds, one for antenna wire and one for ground. I am also considering the best way to mount and weather proof a SO-239 bulkhead fitting for 2 meters. Any suggestions would be greatly appreciated.
|
Dave, MFJ has a product for sale. I think you could adapt it to your needs.
http://www.who-sells-it.com/cy/mfj-e...-fullsize.html
The bulkhead fitting for 2 meters should be pretty straight forward. Drill, with a small hole saw, a hole to fit the fitting and drill the 4 screw holes for the screws and nuts to hold it in place. You could us Rivnuts if you can not get to the back of the skin to which you are mounting. There are also nuts encapsulated in rubber that grip and seal into the hole as they are tightened. They are sold at tractor supply and Home Depot and Ace Hardware. I would place a homemade gasket between the fitting and the trailer panel.
If you need more ask
JIM