Open Roads Radio forum for Ham, Amateur Radio and RV camping - View Single Post - Rfi feed back in my ic-706

n4xyz · 07-05-2014, 01:01 PM

All, thanks for the thoughtful replies. I checked all my connections and found a loos coax fitting on the incoming line through the RV floor. Also renewed the ground to the plate that has the bulkhead fittings at the feedthrough point. Problem seems to have gone. I made several QSOs on 40 and had good audio reports. Higher bands are still Ok. I will continue to try to improve my setup. I am trying to make a portable station that I can be setup and be on the air in a small amount of time. Don't operate mobile just portable from the 5er.
Again TNX
73
Dave

07-05-2014, 01:01 PM	#6
n4xyz Junior Member Join Date: Mar 2008 Posts: 9	All, thanks for the thoughtful replies. I checked all my connections and found a loos coax fitting on the incoming line through the RV floor. Also renewed the ground to the plate that has the bulkhead fittings at the feedthrough point. Problem seems to have gone. I made several QSOs on 40 and had good audio reports. Higher bands are still Ok. I will continue to try to improve my setup. I am trying to make a portable station that I can be setup and be on the air in a small amount of time. Don't operate mobile just portable from the 5er. Again TNX 73 Dave __________________ Dave & Kay N4XYZ & KE4TCH 2008 Duramax CC/LB 2014 Grand Design Reflection 303RLS