Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
Open Roads Radio forum for Ham, Amateur Radio and RV camping


Reply
 
Thread Tools Display Modes
 
Old 08-21-2011, 12:28 PM   #1
W6ZKH
ex-K6YDW
 
W6ZKH's Avatar
 
Join Date: May 2009
Location: Tulare, CA
Posts: 62
Default My RV mount for 5'er

I required a better mount for my "hamstick dipole" and optional Hustler 4BTV vertical, and seeing an article in a QST sometime back, I thought I would try and use he method. Basically it is a 4"x4"x30" wooden post (I used pressure treated), which inserts into the "Poop Toob" square carrier on the back of the RV. Mounted on the end of the post is a 1-1/4" Floor Flange so I can screw in the different pipe risers required for each antenna. For the Hamstick Dipole, I use a 19ft Painters Pole, which collapses to around 8ft, and this is inserted into a 3ft piece of 1-1/2" PVC pipe. I use 2 Thumbscrews to tighten down onto the pole to prevent movement. For the 4BTV, I use an 18" piece of 1-1/4" gal pipe, which the 4BTV base mounts onto. Sofar this system has worked pretty well and see attached pictures of the mount and also the Hamstick dipole. If I am amongst some trees where I cant use this mount, I have a old Radio Shack 3ft tripod which I use out away from the RV to get any clearance required. Normally I will guy the Painters Pole, but in the attached photo, which was taken in Manitou Springs, CO, I didnt require any guying, just stakes driven into the holes of the tripod into the ground. Also, I use 4 radials on the 4BTV vertical, which are made from 25ft Harbor Freight retractable tape measures. Recent article in QST showed how to modify to attach the tape to the base of the antenna.

So, just another idea and project I thought I would put out to you'all...

73 de John W6ZKH




__________________
Head Wrangler John W6ZKH
Chief Cook/housekeeper Connie
Mess makers Bailey & Gretchen (dogs)
2002 Dodge 3500 Diesel-Dually
2011 Forest River Wildcat 313 5th wheel
Icom IC-2800 Dual-bander in truck
Yaesu FT-1900R 2M Xcvr in RV
W6ZKH is offline   Reply With Quote
Old 08-21-2011, 03:00 PM   #2
WD8QBQ
Senior Member
 
Join Date: Nov 2009
Posts: 279
Thumbs up

Some good ideas and a nice job, John. I also noted your idea for screwdriver storage.

JIM
WD8QBQ is offline   Reply With Quote
Old 08-21-2011, 04:17 PM   #3
Radio
Administrator
 
Radio's Avatar
 
Join Date: Nov 2007
Location: Fayetteville, GA, USA
Posts: 3,017
Default

Now that's cool. Thanks for the ideas and I will be adding that to my repertoire of antenna solutions.
__________________

KU4OJ "Wade" Ships Captain, CFO, Chief Engineer
KG4DQQ "Kathy" 1st Officer, Navigator, Best Friend
2007 F-150 SuperCab - 2009 Rockwood 8280SS
Lot's of mostly Kenwood stuff

Radio is offline   Reply With Quote
Old 08-21-2011, 06:13 PM   #4
W6ZKH
ex-K6YDW
 
W6ZKH's Avatar
 
Join Date: May 2009
Location: Tulare, CA
Posts: 62
Default

Yeah, didnt have any SHIM materials, so had to use the proverbial screwdriver method, hi..

John
__________________
Head Wrangler John W6ZKH
Chief Cook/housekeeper Connie
Mess makers Bailey & Gretchen (dogs)
2002 Dodge 3500 Diesel-Dually
2011 Forest River Wildcat 313 5th wheel
Icom IC-2800 Dual-bander in truck
Yaesu FT-1900R 2M Xcvr in RV
W6ZKH is offline   Reply With Quote
Old 08-22-2011, 09:30 AM   #5
N1VWD
Junior Member
 
Join Date: Oct 2010
Location: Waltham, Vermont
Posts: 11
Default spare tire call/freq cover

Where did you get the cool spare tire call/freq cover???
__________________
Brad N1VWD

TV 2018 STX Ford F150


TT 2016 Model 1905 MiniLite
Yesterday is history, tomorrow is a mystery and today is a gift.
N1VWD is offline   Reply With Quote
Old 08-22-2011, 09:18 PM   #6
W6ZKH
ex-K6YDW
 
W6ZKH's Avatar
 
Join Date: May 2009
Location: Tulare, CA
Posts: 62
Default

I had the spare tire lettering put on locally here by a sign company. I just bought a "blank" tire cover, since the Wildcat cover had their logo on it. Cost me $50 for the vinyl lettering job. Actually I had seen that tire cover item at this years Quartzfest in January, with a couple of guys from AZ had them on their RV's. I put on the 146.52 freq since that is what I monitor while traveling.
__________________
Head Wrangler John W6ZKH
Chief Cook/housekeeper Connie
Mess makers Bailey & Gretchen (dogs)
2002 Dodge 3500 Diesel-Dually
2011 Forest River Wildcat 313 5th wheel
Icom IC-2800 Dual-bander in truck
Yaesu FT-1900R 2M Xcvr in RV
W6ZKH is offline   Reply With Quote
Old 08-24-2011, 06:04 PM   #7
N7ZAL
Junior Member
 
N7ZAL's Avatar
 
Join Date: Aug 2011
Location: Roaming the West
Posts: 8
Default

I like your set up, John. I might try the same thing but have a few questions. Have you tried an antenna tuner to load the rig up on different bands....with the one antenna. What frequency ham sticks are you using and do you have the part number for the adapter that makes the dipole??

Thanks,
__________________
73's, Bill
Roaming the west
https://westernwoodartist.com
https://southwestwoodcrafts.com
N7ZAL is offline   Reply With Quote
Old 08-24-2011, 09:03 PM   #8
W6ZKH
ex-K6YDW
 
W6ZKH's Avatar
 
Join Date: May 2009
Location: Tulare, CA
Posts: 62
Default

Quote:
Originally Posted by N7ZAL View Post
I like your set up, John. I might try the same thing but have a few questions. Have you tried an antenna tuner to load the rig up on different bands....with the one antenna. What frequency ham sticks are you using and do you have the part number for the adapter that makes the dipole??

Thanks,
Hi Bill and thanks for the note. Even though I run single band Hamsticks and try to tune them for lowest SWR, I still use a LDG Z11proII autotuner, as the Hamsticks are usually tuned for the QRP CW portion of the bands. I have 3 sets of Hamsticks, for 40,20 and 17 meters. Each Hamstick has a quick connect on them, as found 3 for $10 at several hamfests...Not expensive like the overpriced Hustler model for $30 now I think is what AES is asking.. Check MFJ catalog for the dipole adapter, but you can also use 2-CB mirror mounts back to back, and ground one side to the ground side of the "hot" mount...

Attached is a picture of the center mount I use. It was a CB dual antenna mount that some truckers use, and of course used dual SO-239 connectors to feed the coax "y" to....on one, I removed the plastic insulator insert, and using a washer, it made good contact with the metal mounting surface to provide the "cold" side of the dipole arrangement. You can see I use an 90 deg Angle connector to drop my coax down with. Again, you could use 2 cheap CB mirror mounts, back to back, and do the same thing. One thing I did later that is not shown in this picture is that I used several layers of electrical tape underneath the mount to insulate it from the aluminum Painters Pole section, to prevent any unbalance in the feedline. I really dont know if I accomplished that, but it made me feel good, hi. You can also see the cheap quick connects I used on each element of the dipole to make quick changes without having to get out the wrenches.



John W6ZKH
__________________
Head Wrangler John W6ZKH
Chief Cook/housekeeper Connie
Mess makers Bailey & Gretchen (dogs)
2002 Dodge 3500 Diesel-Dually
2011 Forest River Wildcat 313 5th wheel
Icom IC-2800 Dual-bander in truck
Yaesu FT-1900R 2M Xcvr in RV
W6ZKH is offline   Reply With Quote
Old 08-24-2011, 09:33 PM   #9
N7ZAL
Junior Member
 
N7ZAL's Avatar
 
Join Date: Aug 2011
Location: Roaming the West
Posts: 8
Default

Thanks for the close up pics John. I've been browsing the catalogs and internet to come up with a scheme that will work. I have been looking at MFJ and the Lakeview site. How well does the 40 meter stick do for you?

I have an MFJ-941D antenna tuner that I use, so I can also use that for the "dipole." I only work CW, so don't need a lot of bandwidth.

Back to the site and catalogs, now that I "think" I know what I am doing

How satisfied are you with the performance of the hamstick dipole?? I've been struggling with Hustler verticals and they just don't do as well as I hoped....hence the desire to go horizontal.

I have a 5th wheel that is very similar to yours, as far as the layout. My ladder is at the slide out end though. Is there a reason you didn't use the ladder as a tie point?? I do like the idea of the wood in the sewer hose pipe !!!
__________________
73's, Bill
Roaming the west
https://westernwoodartist.com
https://southwestwoodcrafts.com
N7ZAL is offline   Reply With Quote
Old 08-25-2011, 10:23 AM   #10
W6ZKH
ex-K6YDW
 
W6ZKH's Avatar
 
Join Date: May 2009
Location: Tulare, CA
Posts: 62
Default

Quote:
Originally Posted by N7ZAL View Post

How satisfied are you with the performance of the hamstick dipole?? I've been struggling with Hustler verticals and they just don't do as well as I hoped....hence the desire to go horizontal.

I have a 5th wheel that is very similar to yours, as far as the layout. My ladder is at the slide out end though. Is there a reason you didn't use the ladder as a tie point?? I do like the idea of the wood in the sewer hose pipe !!!
Hello Bill................First..........is your ladder GROUNDED to the frame of the RV?? 99% of them are not, therefore giving a lousy mounting location. I ran some coax strap from the ladder to the frame of another RV I had before this one, and I too was using the Hustler mobile whips, and when I grounded that ladder, signals improved both TX and RX. So, you might try that also..

The Hamstick type antennas work better for me at least, than the Hustler's. The 20, 17, 15, 10 meter versions are pretty much broadbanded, when using a tuner, and load up very well. The 75 and 40 meter antennas are fairly narrow, maybe only good for 50khz. There are many manufactures of these Hamstick type antennas, from Workman to ??.... I find mine at hamfests for $15-20 each, compared to what AES wants. Talking to the fellow who sells them at the hamfests, he only pays $5 each.....pretty good markup, eh??

I even run a Hamstick on my /Pedestrian Mobile QRP setup for 20M and using a 15ft dragwire as the counterpoise, which works great. see my QRZ.com page for photos. I am going to do an experiment in using a second Hamstick as the counterpoise which would be 90 degs from the vertical section, making it an "L" antenna. This would make it raised above ground some, not dragging behind me. Course then I could use it as a skewer if someone ran into it....guess I better put a flag on it. Going to work on that this week, just as an experiment...

Anyway, try grounding that ladder that you have the Hustler mounted on first, and see if that doesnt improve things, otherwise you know the old saying....."verticals radiate poorly in all directions" hi.

John W6ZKH
__________________
Head Wrangler John W6ZKH
Chief Cook/housekeeper Connie
Mess makers Bailey & Gretchen (dogs)
2002 Dodge 3500 Diesel-Dually
2011 Forest River Wildcat 313 5th wheel
Icom IC-2800 Dual-bander in truck
Yaesu FT-1900R 2M Xcvr in RV
W6ZKH is offline   Reply With Quote
Old 08-25-2011, 11:03 AM   #11
N7ZAL
Junior Member
 
N7ZAL's Avatar
 
Join Date: Aug 2011
Location: Roaming the West
Posts: 8
Default

Well John, I have connected a large wire (#6?) from the ladder to the sewer storage "bumper"....figure the bumper is welded onto the frame. I used a metal hose clamp on the ladder and drilled a hole in the bumper, filed around it, then inserted a bolt into it. I'd appreciate any suggestions to improve that.

Ever since I first got my license I had a lot of success with dipoles and beams....poor results from verticals. So I might be fighting a long term prejudice against verticals

I did order the 20 meter hamsticks last night, a telescoping pole and some coax....looking forward to trying your setup out. Meanwhile I'll keep working on the vertical.

Sadly there aren't any hamfests around here so I'm basically confined to the internet.

Again, thanks for the info.

Whoops, I checked and the sewer bumper is bolted to the fame. I might take one of the bolts out and clean around it to make sure there is a good electrical connection.
__________________
73's, Bill
Roaming the west
https://westernwoodartist.com
https://southwestwoodcrafts.com
N7ZAL is offline   Reply With Quote
Old 08-31-2011, 05:58 AM   #12
KE5ZRT
Super Swell Guy
 
KE5ZRT's Avatar
 
Join Date: Oct 2010
Location: Amarillo
Posts: 273
Send a message via Yahoo to KE5ZRT
Default

I hope you enjoy the hamstick dipoles as much as I have. I've been addicted to PSK-31 for about two weeks and you can catch me on 14.070.150 most evenings. If I'm not there, it's because my wife ke5zru has taken over the station for her turn with PSK!
__________________
Extra Class Amateur (Ham) Radio Operator, VE, SKYWARN Storm Spotter, ARES Volunteer, TSA Security Officer, Full-time RV dweller (Amarillo TX for now), webmaster www.PanhandleARES.org, Married to ke5zru!

KE5ZRT is offline   Reply With Quote
Old 08-31-2011, 09:48 PM   #13
KF5BET
Senior Member
 
KF5BET's Avatar
 
Join Date: May 2009
Location: Lafayette, LA
Posts: 507
Default

Hey Chris...Long time no hear. Hope you two are doing well.
__________________
Galen - KF5BET
Crysti - "the CHIEF"
Abbi - KF5BEW dd
Kendra - KF5FYS dd
Maggie - Cat chaser
2005 F250, 1996 Nomad
KF5BET is offline   Reply With Quote
Reply

Tags
4btv, antenna mount, hamstick dipole, screwdriver, tripod mount

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3

All times are GMT -5. The time now is 05:10 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
×