Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
Open Roads Radio forum for Ham, Amateur Radio and RV camping


Reply
 
Thread Tools Display Modes
 
Old 06-01-2008, 11:34 AM   #1
w7wv
Senior Member
 
w7wv's Avatar
 
Join Date: Jan 2008
Location: SE AZ
Posts: 239
Default Telescoping pole? Where to get one?

For occasional use I would like to have a telescoping fiberglass (?) pole for the MH. 20-30 range would be nice.
I am looking for something with lightweight construction that I can store easily.
I want to use it to elevate a wire to be fed by my AH-4 tuner.
Does anyone have any recommendations?
w7wv is offline   Reply With Quote
Old 06-01-2008, 02:08 PM   #2
TXiceman
Senior Member
 
TXiceman's Avatar
 
Join Date: Nov 2007
Location: Near Houston, TX
Posts: 553
Default

http://www.tmastco.com/

Not too expensive.

Then there is always Mighty Fine Junk.


Ken
__________________
KE5DFR
2013 HitchHiker Champagne 38RLRSB, 2012 F350 Dually crew cab, 6.7L,
Mobile- Yaesu FT857D w/ Lil' Tarheel II antenna and Larsen dual bander, Turbo Tuner.
Base unit...Kenwood TS480HX, LDG AT200 Pro tuner, Eagle One Vertical and Windom 80 meter dipole.
Standard Schnauzer..her call is K9WOOF
TXiceman is offline   Reply With Quote
Old 06-02-2008, 01:10 AM   #3
w6pea
Senior Member
 
w6pea's Avatar
 
Join Date: Dec 2007
Location: Chula Vista,Mexifornia
Posts: 176
Default

Quote:
Originally Posted by TXiceman View Post
http://www.tmastco.com/

Not too expensive.

Then there is always Mighty Fine Junk.


Ken
Thanks for the link......I have been looking for a Mast like that.
__________________
"Semper Fi"
Politicians are a lot like diapers, They should be changed often, and for the same reason!
ARRL-VE SANDARC-VE Team Leader
When all else fails...Amateur Radio
w6pea is offline   Reply With Quote
Old 06-02-2008, 07:12 AM   #4
wa8yxm
Senior Member
 
Join Date: Nov 2007
Location: Mobile, on the road
Posts: 1,139
Send a message via AIM to wa8yxm Send a message via Yahoo to wa8yxm Send a message via Skype™ to wa8yxm
Default

Well Sunsetter and at least one other company make telescoping flag poles. I prefer metal to fiberglass myself

http://www.sunsetterflagpole.com/ <- Metal poles

http://www.wonderpole.com/ <- Fiberglass poles

Read the documentation on the poles and you will understand why I like metal better

NOTE put Telescoping Flag Poles into Mr. Google's famous web site and.... A lot pop up
wa8yxm is offline   Reply With Quote
Old 06-02-2008, 08:28 AM   #5
w7wv
Senior Member
 
w7wv's Avatar
 
Join Date: Jan 2008
Location: SE AZ
Posts: 239
Default

OK, I just found these on the internet by Jackite and they will do the job and the price is right.
It appears many hams are using these too.
Here's a link for anyone interested.

http://www.jackite.com/index.php?cPa...71ee0c83542f8e

I also found these on eBay for less than $41 plus shipping. They collapse to 46".
w7wv is offline   Reply With Quote
Old 09-20-2009, 05:35 PM   #6
k8zfj
Member
 
k8zfj's Avatar
 
Join Date: Oct 2008
Location: RI
Posts: 91
Default

Quote:
Originally Posted by w7wv View Post
OK, I just found these on the internet by Jackite and they will do the job and the price is right.
It appears many hams are using these too.
Here's a link for anyone interested.

http://www.jackite.com/index.php?cPa...71ee0c83542f8e

I also found these on eBay for less than $41 plus shipping. They collapse to 46".

I purchased one a few months ago & first used it this past weekend while working a qrp contest & camping, in 2 different antenna setups, and both used the mast lashed to ladder:
1 - ran a 66' pc of wire in somewhat of an L configuration to tuner
2 - mast was center support for 40M inverted V, fed with twin lead via balun to rig

setup # 2 provided most contacts, but wouldnt tune up worth a crap on 20M, where setup #1 would.

rigs used were an IC703+ & Rockmite on 40M; max outout pwr was 2w; farthest qso from RI was FL on 20M

darn this is FUN !
__________________
Randy, K8ZFJ
'08 4WindsChateauSport
Icom 703+;Argonaut 515 plus various qrp homebrew rigs
k8zfj is offline   Reply With Quote
Old 10-05-2010, 09:39 PM   #7
KE5ZRT
Super Swell Guy
 
KE5ZRT's Avatar
 
Join Date: Oct 2010
Location: Amarillo
Posts: 273
Send a message via Yahoo to KE5ZRT
Default

Quote:
Originally Posted by wa8yxm View Post
Well Sunsetter and at least one other company make telescoping flag poles. I prefer metal to fiberglass myself

http://www.sunsetterflagpole.com/ <- Metal poles

http://www.wonderpole.com/ <- Fiberglass poles

Read the documentation on the poles and you will understand why I like metal better

NOTE put Telescoping Flag Poles into Mr. Google's famous web site and.... A lot pop up
Thanks from the link...the sunsetters look nice. Rohn also makes a solid pushup pole: http://www.3starinc.com/rohn_telescopic_masts.html
__________________
Extra Class Amateur (Ham) Radio Operator, VE, SKYWARN Storm Spotter, ARES Volunteer, TSA Security Officer, Full-time RV dweller (Amarillo TX for now), webmaster www.PanhandleARES.org, Married to ke5zru!

KE5ZRT is offline   Reply With Quote
Old 11-30-2010, 06:34 PM   #8
WD8QBQ
Senior Member
 
Join Date: Nov 2009
Posts: 279
Default

Quote:
Originally Posted by wa8yxm View Post
Well Sunsetter and at least one other company make telescoping flag poles. I prefer metal to fiberglass myself

http://www.sunsetterflagpole.com/ <- Metal poles

http://www.wonderpole.com/ <- Fiberglass poles

Read the documentation on the poles and you will understand why I like metal better

NOTE put Telescoping Flag Poles into Mr. Google's famous web site and.... A lot pop up
The wonderpole link is very good and look what I found on the bottom of the page and very easily overlooked.

http://www.wonderpole.com/wp640_630.html

Yes more costly, but 40' tall WOW

JIM
WD8QBQ is offline   Reply With Quote
Old 10-14-2008, 08:13 AM   #9
wa0mqe
Junior Member
 
Join Date: Dec 2007
Location: Colorado Springs, CO
Posts: 3
Default

I realize this is abit late in posting, but if you haven't found one yet, you might try the MFJ-1910 33-foot fiberglass pole. It's specifically built for antenna's.

http://www.mfjenterprises.com/Produc...uctid=MFJ-1910
wa0mqe is offline   Reply With Quote
Old 10-14-2008, 03:21 PM   #10
wa8yxm
Senior Member
 
Join Date: Nov 2007
Location: Mobile, on the road
Posts: 1,139
Send a message via AIM to wa8yxm Send a message via Yahoo to wa8yxm Send a message via Skype™ to wa8yxm
Default

There are several companies that make telescoping flag poles. Just google on them, some are metal some fiberglass... Mine is metal

Also you can get a painter's pole.. I've seen these that were.. Well, let's see it was a 2 story house with a steep roof and a half basement and we were painting the very peak while standing on the ground... You figure it out.. That was one LONG pole
wa8yxm is offline   Reply With Quote
Old 10-15-2008, 02:24 PM   #11
Manual Garcia O'Kely
Member
 
Join Date: Feb 2008
Posts: 96
Default

The MFJ 33' lightweight mast is OK for a vertical or supporting maybe part of a dipole - the end piece is just as whippy as a fishing pole and about as rigid...

BUT, I removed the last section and put a 14 ga wire inside, taped to the top and it's made a dandy vertical with a coupler at the base and radials. Works decent on most bands with 100 watts and since it tucked into one of my trees, it's subtle.

But if you want a more rigid pole, MFJ makes them as well, heavier and more expensive, but some of them look like they could hold up a small antenna other than wire.
Manual Garcia O'Kely is offline   Reply With Quote
Old 10-19-2008, 07:34 AM   #12
wa0mqe
Junior Member
 
Join Date: Dec 2007
Location: Colorado Springs, CO
Posts: 3
Default

Manuel... that's a good idea running the wire up the inside center. I have mine mounted to the ladder rack on my motorhome. I've been thinking of a good way to run a wire up the pole. I was thinking wrapping a 16 or 14 gauge wire around the outside would do the job, like you with a tuner at the base or course. Wrapping two or three turns per section I'd have 80 or 90 feet of wire. But maybe just running it up the center would work just as good. When I lower it for travel maybe the wire will just bunch up down toward the bottom.
wa0mqe is offline   Reply With Quote
Old 10-15-2008, 03:11 PM   #13
One Country Boy
Senior Member
 
One Country Boy's Avatar
 
Join Date: Jun 2008
Location: Wewahitchka, FL
Posts: 1,204
Default

I ordered one of the 31 ft kite poles off e-Bay. I've not used it yet but extended it out. Will be nice to have while traveling I think.



__________________
Jim ~ W4EWA
One Country Boy is offline   Reply With Quote
Old 10-16-2008, 07:55 AM   #14
wa8yxm
Senior Member
 
Join Date: Nov 2007
Location: Mobile, on the road
Posts: 1,139
Send a message via AIM to wa8yxm Send a message via Yahoo to wa8yxm Send a message via Skype™ to wa8yxm
Default

I can see were a couple of them could be used, Properly mounted they could hold the ends of about a 40 meter dipole or a 80 meter slinky type dipole.
wa8yxm is offline   Reply With Quote
Old 10-21-2008, 03:16 PM   #15
Radioman
Junior Member
 
Join Date: Oct 2008
Posts: 4
Smile Telescoping pole

I'm using one of these: Jackite.com

This looks interesting: http://shop.dx-is.com/main.sc

Radioman
Radioman is offline   Reply With Quote
Old 10-21-2008, 03:17 PM   #16
Radioman
Junior Member
 
Join Date: Oct 2008
Posts: 4
Smile Telescoping pole

I'm using one of these: Jackite.com

This looks interesting: http://shop.dx-is.com/main.sc


Radioman
Radioman is offline   Reply With Quote
Old 10-21-2008, 03:29 PM   #17
Radioman
Junior Member
 
Join Date: Oct 2008
Posts: 4
Smile Wire up the inside

Manual,
Sorry about the double post concerning the glass pole.
I meant to add a friend of mine uses a clothesline retractor or whatever
it's called using real flexible wire like I think flexweave brand.

Radioman
Radioman is offline   Reply With Quote
Old 10-22-2008, 08:11 AM   #18
wa8yxm
Senior Member
 
Join Date: Nov 2007
Location: Mobile, on the road
Posts: 1,139
Send a message via AIM to wa8yxm Send a message via Yahoo to wa8yxm Send a message via Skype™ to wa8yxm
Default

Problems with running a wire up the center are three fold..... One may not be an issue on fiberglass, One you can deal with, and one may not be a problem.

1: As the pole swings in the breeze the wire "Slaps" tin inside of the pole.. This makes noise, however with a small wire and a fiberglass pole.. Perhaps not

2: When you lower the pole you need to do something with the wire, Roll it up on a fishing reel perhaps?

3: There is not always a clear path to the top. the tubes may have solid plugs in the bottom, I do not know if drilling them out is reasonable.


Still..... Good I think it's a good plan..
wa8yxm is offline   Reply With Quote
Old 10-23-2008, 08:19 AM   #19
mexsunny
Junior Member
 
mexsunny's Avatar
 
Join Date: Dec 2007
Location: Mexico, New Mexico
Posts: 4
Default

Check sporting centers, such as Sportsman's warehouse, for collapsible or sectional fishing poles. I have seen some pretty strong ones that are fairly long for surf use.
mexsunny is offline   Reply With Quote
Old 12-19-2008, 11:59 AM   #20
WB4VYH
Junior Member
 
Join Date: Dec 2008
Location: East Tennessee
Posts: 15
Default

During my years in the "dirt" Air Force, HF Radio was used a lot. The tactical HF whip antennas were fiberglass (metal wire inside and metal sections on the end), the sections were about 5 feet or so long and screwed together, for a max length of 32 ft (any length above 15 ft should be guyed. These things were tough and stood up very well. They were lots of add ons, including guying equipment, carry bags, ground mount tripods, clamps for adding wire to make it in an inverted L. However, they came in only one color, Olive Drab!

Additionally, the Camo kits we deployed with uses fiberglass (as I remember there were some medal one also ) poles (to support the cammo netting)about 3 ft long, and about 1.5 IN in dia. and were swaged so that one fit into the next. They were pretty durable and , you guessed it, they were also olive drab!

We also had HF Antenna Support Kits, called "GRA-4!" These things were designed to sopport almost any configuration of a wire antenna for HF use. A compleat GRA-4 had any item you would need to put up a HF Antenna. Wire, center-feed sections, end insulators, coax, guying kits, base plates, masts, et al! The mast sections were aluminum, either 3 or 5 feet long (different kits) swaged ends and were designed to be installed to a 40 ft with proper guying! Very strong mast sections, and in my favorite color.....olive drab!

There was also a NVIS Antenna Kit, but it was a bit real-estate intensive. It worked pretty well for "in-theater" (70-350 mile range) communications.

I have seen parts of all the above "systems" at Ham Fest and also surplus stores. Remember these systems were for Tactical use (but not to be back-packed) and were made to erect quickly and to pack up compactly, if not lightly! I have made great use of parts of these systems during my ham activities! OK, I confess I have been know to paint them a color other than olive drab.

The next time you see a booth with lots of Olive drap stuff sittin' around it at a ham fest.....stop and look...it might give you an idea!

Al
WB4VYH is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Fishing/~No Pole/Bait or License Required. w7wv Rag Chew 0 06-13-2008 06:52 PM
Work the south pole on 100 watts Radio Antenna Solutions 12 02-22-2008 05:44 PM

» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3

All times are GMT -5. The time now is 01:10 PM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
×