Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
Open Roads Radio forum for Ham, Amateur Radio and RV camping


Reply
 
Thread Tools Display Modes
 
Old 05-19-2013, 10:41 AM   #1
taylorgso
Junior Member
 
Join Date: May 2013
Posts: 2
Default 2M mount for Class C Mercedes Chassis

We just recently downsized from a 38' Diesel Pusher to a 24' Class C (Forest River Solera - built on Mercedes Chassis). We had used a through glass mount on the pusher, as there was no convenient other mount. The through glass mount was mounted on top middle windshield - results were acceptable but not great. Portable shack is Icon 706, and I'll find a place to mount the screwdriver somewhere. I'd like to mount the 2M whip somewhere on the hood with a metal/metal connection for better ground plane, but the hood is steeply angled two directions. Can anyone recommend a NMO mount. I've looked at a mount from comet but have no idea what the specs are for loss, etc. - it comes with a short thin coax to make it easier to connect inside the hood.

Thanks
de N4RWU
taylorgso is offline   Reply With Quote
Old 05-19-2013, 11:30 AM   #2
KF5BET
Senior Member
 
KF5BET's Avatar
 
Join Date: May 2009
Location: Lafayette, LA
Posts: 507
Default

I bought a NMO mount for the truck, but could never bring myself to cutting a hole for it.

I have no other recommendations for you..Sorry.

Welcome to the group and glad you found us.

Galen
__________________
Galen - KF5BET
Crysti - "the CHIEF"
Abbi - KF5BEW dd
Kendra - KF5FYS dd
Maggie - Cat chaser
2005 F250, 1996 Nomad
KF5BET is offline   Reply With Quote
Old 05-19-2013, 02:32 PM   #3
N3LYT
Senior Member
 
Join Date: Jun 2012
Location: Maine
Posts: 709
Default

Some of the hood mount stuff is pretty flexible and will tilt at a pretty good angle but it's pretty hard to tell from a picture on a web page. Is there a way you could mount some thing inside the hood to the fender well and have the bracket still clear the closed hood? I saw one a couple of weeks ago like yours with a screw drive antenna and the whip look as if it had been through a washing machine.
N3LYT is offline   Reply With Quote
Old 05-19-2013, 08:13 PM   #4
NN5I
Carl, nn5i
 
NN5I's Avatar
 
Join Date: Sep 2011
Location: Tallahassee, FL
Posts: 1,441
Default

How about a trunk-lip mount on the edge of the hood? Would that work?
__________________
-- Carl
NN5I is offline   Reply With Quote
Old 05-19-2013, 10:46 PM   #5
taylorgso
Junior Member
 
Join Date: May 2013
Posts: 2
Default

Quote:
Originally Posted by NN5I View Post
How about a trunk-lip mount on the edge of the hood? Would that work?
Carl - that's what I was thinking. Due to the overhang cab, It would have to be on the side edge, and fairly far forward. The hood slopes down at a steep angle, so it needs to articulate somewhat.

De Ed N4RWU
taylorgso is offline   Reply With Quote
Old 05-20-2013, 06:57 AM   #6
NN5I
Carl, nn5i
 
NN5I's Avatar
 
Join Date: Sep 2011
Location: Tallahassee, FL
Posts: 1,441
Default

Yes, the antenna would lean forward quite a bit. This may look funny, but it will have surprisingly little effect on how well the antenna works.

Let's work a few examples.

Suppose, for example, that the antenna is leaning straight forward at 45 degrees. How will this affect its radiation? Consider, first, radiation in the forward direction. The signal strength in the forward direction will be reduced, of course -- by the cosine of the angle of lean. Suppose that we assume a certain strength S in the forward direction for a perfectly vertical antenna; then the same antenna leaning forward 45 degrees will radiate a signal with strength (S cos 45) or 0.707S. That is, because of the forward lean it will be as if you were running, say, 35 watts instead of 50 watts. That's a loss of about 1.5 dB, about 1/4 of an S-unit. Negligible!

How about radiation to the right or left side? The radiation to either side will be exactly as strong, with the antenna leaning forward 45 degrees, as it would be with the antenna perfectly vertical, no loss at all. However, the signal to the side will no longer be vertically polarized, and the receiving antenna at the other end (probably on a repeater) is vertical. This also reduces the received signal by the cosine of the angle, so that, too, will be like running 35 watts instead of 50, about 1.5 dB weaker. Negligible!

Radiation to the rear? Same as to the front! The signal will probably be weaker there, though, because the antenna is so placed that the truck is in the way. But that would be true no matter the angle of lean; any effect will be caused by the antenna's location, not by its angle.

All of that is for an antenna leaning forward 45 degrees. How about other angles? Here's the result for a few different angles:

10 degrees: 0.06 dB, 1/100 of an S-unit
20 degrees: 0.27 dB, 1/40 of an S-unit
30 degrees: 0.62 dB, 1/10 of an S-unit
45 degrees: 1.5 dB, 1/4 of an S-unit
60 degrees: 3 dB, 1/2 of an S-unit
75 degrees: 5.87 dB, just less than 1 S-unit

So you can see that leaning the antenna has astonishingly little effect on the transmitted (or received) signal strength unless it's nearly horizontal.

All of that stuff assumes that the other guy's antenna is at the same altitude as yours. What about repeaters? Their antennas are higher. Radiation at upward angles is affected not only by the elevation from horizontal, but also by reflections from the ground. The analysis is a little more complex, but the results are similar, and the effect of a non-vertical antenna is similarly negligible.

So, you need not worry if the antenna is mounted so that it leans, unless the appearance is bothersome. Maybe you could mount two antennas, one on the right side of the hood and one on the left side, with one hooked up and the other not, and put tennis balls on the tips. Then you'd look like the Orkin Man!
__________________
-- Carl
NN5I is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3

All times are GMT -5. The time now is 08:52 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
×