 |
03-09-2009, 07:24 PM
|
#1
|
Senior Member
Join Date: Jun 2008
Location: Wewahitchka, FL
Posts: 1,204
|
Assistance needed locating a capacitor please.
Hey guys,
Christmas of 2007, my XYL bought me an upright 15 gal air compressor from Lowes. One of the made for Lowes, Task Force Brand. The little electric motor has probably not run one hour totally. The other day it popped the breaker and would not run after I reset it. The run/start capacitor is bad in it. Called all the numbers Lowes gave me and the "800" number on the side of the machine. All out of business. The cap is made in China. Wouldn't you know it. I've been looking at the manufacturing company on the internet and called a couple of distributors in the states, but guess what ? Out of business. Hard times everywhere.
Here's are the numbers on it or the ones that I can make out. I'll also include some photos. It's manufactured by Huizhong in China. It is their #CBB65. It's 120 uF +/- 5%. Although the motor operates on 120 volts AC it says rated for 2?? (can't make out the numbers. Probably 240. It also has a # E232158 next to the "US" symbol. It also has a symbol that I think is a stateside company, looks like a backwards "R", attached to a "U". Don't know if we can see that in the photo I took or not.
Anyway, if you find one or know of a distributor, please let me know. I checked locally today and none. I've been looking on the web but no luck yet. If I could find the same value, I really could do without the mounting bolt as long as it is about the same physical size.
Thanks for anything you can do.
__________________
Jim ~ W4EWA
|
|
|
03-09-2009, 08:00 PM
|
#2
|
Senior Member
Join Date: Jan 2008
Location: Manchester, CT
Posts: 1,034
|
Try this link Jim, hope it works for you.
Andy - n1ork
http://www.made-in-china.com/china-p...or-CBB65-.html
__________________
 CQ..CQ..CQ..DE ANDY, N1ORK..QTH Manchester, CT...QRZ..QRZ..
Hello anyone out there?
Is this thing on? 
SkyWarn, CERT, EmComm
|
|
|
03-09-2009, 09:44 PM
|
#3
|
Member
Join Date: Oct 2008
Location: RI
Posts: 91
|
the UR says it's a UL safety approved part; any motor run cap, that meets same ratings as indicated on the part should work.
try this company too:
http://lcr-inc.com/motor-run-capacitors.html
altho they import everything from Asia, maybe they have one available in local stock.
I've referred some of my former customers to them with success
__________________
Randy, K8ZFJ
'08 4WindsChateauSport
Icom 703+;Argonaut 515 plus various qrp homebrew rigs
|
|
|
03-09-2009, 10:24 PM
|
#4
|
Administrator
Join Date: Nov 2007
Location: Fayetteville, GA, USA
Posts: 3,017
|
Try a walk-in appliance part dealer, that sells parts for washing machines, A/C units and that sort of thing. You might have to use duct tape and bailing wire to mount the new one, but I bet they'd have one that worked.
|
|
|
03-10-2009, 02:40 AM
|
#5
|
Senior Member
Join Date: Jun 2008
Location: Wewahitchka, FL
Posts: 1,204
|
Quote:
Originally Posted by Radio
Try a walk-in appliance part dealer, that sells parts for washing machines, A/C units and that sort of thing. You might have to use duct tape and bailing wire to mount the new one, but I bet they'd have one that worked.
|
I did all that first. Checked with an AC & Heating friend, he checked his catalogs, nothing that had that much capacitance. I went to four different places in Panama City today. One that specializes in compressors and air tools, nothing big enough. An electric motor shop had a starting cap that covered that range but not a run cap. I'm told a starting capacitor would burn up quickly when used in a running capacity. I found 2 60 uF's. I was thinking of putting them in parallel, but the physical size was way too big.
Andy, I checked that "Made in China" place everyone I called had gone out-of-business. Randy's site looks promissing. I'll call them tomorrow. The problem is finding a start/run capacitor with that much capacitance. I don't care if it has the stud on it, I can haywire it to something for support like Wade says.
Thanks guys, I appreciate it. I'll keep looking.
__________________
Jim ~ W4EWA
|
|
|
03-10-2009, 10:42 AM
|
#6
|
Senior Member
Join Date: Jun 2008
Location: Gateway to the thumb
Posts: 243
|
Jim,
Any rewind shops near you? A lot of those shops that rewind motors would carry them.
__________________
Dan,
Almost a Marine (Army/Navy)
15 months in VietNam (12 Army/3 Navy)
Love to
|
|
|
03-10-2009, 04:29 PM
|
#7
|
Senior Member
Join Date: Jun 2008
Location: Wewahitchka, FL
Posts: 1,204
|
Quote:
Originally Posted by KC1BUD
Jim,
Any rewind shops near you? A lot of those shops that rewind motors would carry them.
|
I was at a rewind repair shop yesterday. I just knew they would have what I needed. They had a 120 mfd but it was a starting cap, not a run type cap. There's a difference I'm told.
Most all the run caps fall in about the 30 - 60 mfd range. Difficult to find with a 120 value. I'll keep looking though. The link K8ZFJ sent looks promising, have just not made the call yet. I sincerely appreciate all the suggestions and links. Just been busy with other stuff today.
Thanks again guys...
__________________
Jim ~ W4EWA
|
|
|
03-10-2009, 06:33 PM
|
#8
|
Member
Join Date: May 2008
Location: Miami, FL / Ashburn, VA
Posts: 90
|
Hi Jim - Hope you are doing well. For what you are using it for the capacitor probably is a Start/Run type. Not sure what kind of circuit you have there on the compressor but for bigger motors there is typically a start capacitor that is switched on during a start up and it is switched out of the circuit through a relay or contactor and a run capacitor kind of takes over while the motor is running. I dont know what you were going to pay locally but chances are the one you found would work. If not, you take a look at Newark Electronics -- We deal with them all the time. I didnt read up on the specs, but this one might work also (Looks like its about $6.50 ....
http://www.newark.com/cornell-dubili...tor/dp/72K6669
Let me know how you get on with it
73
Mark
__________________
Mark Johnson - W3ZI
2007 National Sea Breeze LX / 8367
2007 Chevrolet Malibu Toad
TS2000 / Yaesu 857D and a Tarheel Antenna
|
|
|
03-10-2009, 09:22 PM
|
#9
|
Senior Member
Join Date: Jun 2008
Location: Wewahitchka, FL
Posts: 1,204
|
Thanks Mark, that one looks like it will work. It is a 120 mfd start/run capacitor.
__________________
Jim ~ W4EWA
|
|
|
03-11-2009, 09:31 AM
|
#10
|
Senior Member
Join Date: Nov 2007
Location: Mobile, on the road
Posts: 1,139
|
I will support the others, An appliance store or even an electronics parts store
Fairly common part, exact match is NOT important so you can go off by as much as 20 percent. I'm not sure which way is the better way to go
|
|
|
03-14-2009, 11:55 PM
|
#11
|
Senior Member
Join Date: Nov 2007
Location: Yuba City, Ca
Posts: 304
|
We use lots of start and run caps I have never used a run cap that big what kind of motor needs that much capacitance? Are you sure it's 120uf and not 12.0 uf ? or it's a motor start cap and not a run cap.
I would think a air compressor would benefit from a starting cap trying to start against a tank of pressure.
Good luck
__________________
73 de Bill, (N7OQ)
RV: 2006 Outback 23RS
USAF Retired, God Bless our Troops
Licensed in 1978 ex N7AFX, DA1VW, KK6GR
|
|
|
03-15-2009, 10:35 AM
|
#12
|
Senior Member
Join Date: Jun 2008
Location: Wewahitchka, FL
Posts: 1,204
|
Thanks Bill... I ordered one Friday that should work. Yes, it states on the label 120 uF (in one of the photographs). It's a run/start cap I'm told. That may be why Lowes no longer carries those compressors. If this one goes quickly I may have to try a different value. The cap going out so fast may be due to poor engineering. Lowes has certainly been of no help and the manufacture has gone out of business.
__________________
Jim ~ W4EWA
|
|
|
03-31-2009, 11:09 AM
|
#13
|
Senior Member
Join Date: Jun 2008
Location: Wewahitchka, FL
Posts: 1,204
|
I was asked in a PM the other day if I had gotten my air compressor running. I realized I needed to close out this thread. The cap I ordered was not physically like the original, but values were the same. I replaced the original and strapped the new cap to the old with nylon wire ties and hooked it up. It worked like a champ. A few wire ties and a little duct tape will fix most anything. I appreciate the suggestions and help. I ordered the cap from Newark, the location Mark sent me. I had the cap in two days. Shipping and cap was under $10.00. I apprecite the help from ORR members.
I have to say also that Newark was a good business to work with. Prices and shipping very reasonable. Delivery as promised. If you have a problem as I did, they have a tech department that will assist you in cross referencing. I did not have to use the tech department but it was nice to know they had that option. Chalk one up for "made in the USA". BTW, they even included return mailing lable, etc. If the part had not been what I needed it was returnable. Good business to order from when electronics are needed.
Thanks all.
Jim
__________________
Jim ~ W4EWA
|
|
|
03-17-2015, 12:49 PM
|
#14
|
Junior Member
Join Date: Mar 2015
Location: Prescott, AZ
Posts: 3
|
Jim W4EWA - While this thread is a little old, can you tell me if you were successful with your haywire capacitor from Cornell Dubilier?? I have a Harbor Freight air compressor that has the same problem and you have already tried all the steps that I was going to try. You would save me a lot of time and effort if you were successful. Tks, 73, Bob WB6ODR, Prescott, AZ
|
|
|
03-17-2015, 12:55 PM
|
#15
|
Junior Member
Join Date: Mar 2015
Location: Prescott, AZ
Posts: 3
|
Jim, I see that I did not read ALL the thread. I'll order one today. Thanks... Bob WB6ODR
|
|
|
03-17-2015, 07:18 PM
|
#16
|
Senior Member
Join Date: Jun 2012
Location: Maine
Posts: 709
|
Yeah a electric motor shop it is most likely a start/run cap. I'll look tomorrow I think I may have one from a compressor that had a bad motor.
|
|
|
03-18-2015, 10:39 AM
|
#17
|
Senior Member
Join Date: Nov 2007
Location: Mobile, on the road
Posts: 1,139
|
A generic motor start cap with the same Farad rating will do.. Need not be the same part number/manufacturer.. Most any electric supply or electric motor shop.
My compressor is a Crafstman...Odds are Sears has a part that will fit but you will play ..hard...Figuring out which one since they do not list 'em that way.
|
|
|
 |
Thread Tools |
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|